Mijia AI Smart IP Camera 1080p IP65 doesn't work after upgrade firmware - Mi Gadgets - Mi Community

Recently I bought 5 new cameras this new model with a magnetic plug, and I already have other in different models that works fine.

After installed the theses new five cameras I can open using MI Home normally, but, after upgrade de firmware all of these doesn't work.

I try to connect but nothing happens, stop in the message Preparing to Play ... 91%

Can someone help me to solve this problem?

https://m.gearbest.com/ip-cameras/pp_3002400652311091.html?wid=2000001

2020-08-11 18:14:14

Reply

Favorites5 Rate

Rookie Bunny

1650221592 |

#1

you need to downgrade camera to firmware 4.0.5_0105.

2020-08-19 06:56:17

Reply Report Rate

Advanced Bunny

1582013410 Author | from MI 9

#2

1650221592
you need to downgrade camera to firmware 4.0.5_0105.

Is this a specific problem just for me or for everybody?
why Xiaomi doesn't fix it in the next firmware release?
the night vision is terrible.
this camera is not ship. Xiaomi you need to solve your reputation here.

2020-08-19 07:00:03

Reply Report Rate

Advanced Bunny

1582013410 Author | from MI 9

#3

1582013410
Is this a specific problem just for me or for everybody?
why Xiaomi doesn't fix it in the next firmware release?
the night vision is terrible.

sorry, I forget to say thank you for your comment

2020-08-19 07:00:40

Reply Report Rate

Rookie Bunny

1690771858 |

#4

1650221592 replied at 2020-08-18 23:56:17
you need to downgrade camera to firmware 4.0.5_0105.

Can you post how to do this please as I have the same problem and currently have 3 cameras I cannot use.

Thanks in advance.

2020-08-27 05:28:41

Reply Report Rate

Advanced Bunny

1582013410 Author | from MI 9

#5

1690771858
Can you post how to do this please as I have the same problem and currently have 3 cameras I cannot use.

Thanks in advance.

tell me your email address to send the file.
After you unzip files,the first and second is Firmware flash package,the third is how to flash ,
step1:please put demo_hlc6.bin file and demo_hlc6_sign.bin file copy to micro sd card,and inset to camera,
step2: Then power off the camera, and then power on the camera while pressing the camera setup hole with the pin;
Step3:After the yellow and blue lights are on at the same time, release the reset button. After the yellow light is always on, the flashing is completed, and then the camera starts to start

2020-08-27 05:35:13

Reply Report Rate

Rookie Bunny

1690771858 |

#6

1582013410 replied at 2020-08-26 22:35:13
tell me your email address to send the file.
After you unzip files,the first and second is Firmware flash package,the third is how to flash ,
step1:please put demo_hlc6.bin file and demo_hlc6_sign.bin file copy to micro sd card,and inset to camera,

Thanks for the quick reply.

My email address is xuz at krian.co.uk

2020-08-27 05:40:55

Reply Report Rate