In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Xiaomi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .
Agree

Mi A3

Rookie Bunny

Felpzinh Author |

#11

Abycho_LG replied at 2019-11-12 08:12:34
Uninstall all the MI Flash tools that are on the PC and install the version you can download from https://c.mi.com/oc/miuidownload/detail?guide=2, step 1. Try flashing the V10.3.4.0.PFQMIXM ROM again. Setup the MiFlash with "clean all" at bottom - right.

I had tried to use this version, but I think it does not support EDL mode, only fastboot mode. Tried here again and gives error: "can not found programmer file."
2019-11-12 23:44:08

Rookie Bunny

Felpzinh Author |

#12

Abycho_LG replied at 2019-11-12 08:12:34
Uninstall all the MI Flash tools that are on the PC and install the version you can download from https://c.mi.com/oc/miuidownload/detail?guide=2, step 1. Try flashing the V10.3.4.0.PFQMIXM ROM again. Setup the MiFlash with "clean all" at bottom - right.


In fastboot mode the message appears:

[12:45:08]:0    c3f8f300b5d4     2,0063445s     [12:45:08  c3f8f300b5d4]:error:FAILED (remote: Flashing is not allowed in Lock State)
2019-11-12 23:47:40

Master Bunny

Abycho_LG | from app

#13

Felpzinh
I had tried to use this version, but I think it does not support EDL mode, only fastboot mode. Tried here again and gives error: "can not found programmer file."

Can show the MiFlash log with the EDL attempt?
2019-11-13 00:42:07
<<<-->>> Mi A2 <<<-->>>

Rookie Bunny

Felpzinh Author |

#14

Abycho_LG replied at 2019-11-12 14:42:07
Can show the MiFlash log with the EDL attempt?

It doesn't even start spinning ..
I tried several times and the last one was in fastboot mode

[12:28:26]:0    COM3     0,499749s     can not found programmer file.
[12:29:23]:0    COM3     0,5107057s     can not found programmer file.
[12:31:48]:0    COM3     0,5092355s     can not found programmer file.
[12:32:20]:0    COM3     9,4586366s     Referência de objeto não definida para uma instância de um objeto.
[12:32:50]:0    COM3     0,5102804s     can not found programmer file.
[12:45:08]:0    c3f8f300b5d4     2,0063445s     [12:45:08  c3f8f300b5d4]:error:FAILED (remote: Flashing is not allowed in Lock State)
2019-11-13 12:22:17
Invalid floor, the posts have been deleted #15
Invalid floor, the posts have been deleted #16
The path for the select field is c:\laurel_sprout_global_images_V10.3.4.0.PFQMIXM_9.0\
2019-11-13 15:52:45
<<<-->>> Mi A2 <<<-->>>

Rookie Bunny

Felpzinh Author |

#18

Abycho_LG replied at 2019-11-13 05:52:45
The path for the select field is c:\laurel_sprout_global_images_V10.3.4.0.PFQMIXM_9.0\

Don't run  in this version friend..
I tried several times..

In the newest version of MIflash:


[03:35:38  COM3]:MiFlash 2019.10.30.0
[03:35:38  COM3]:flash in thread name:COM3,id:17
[03:35:38  COM3]:sw in images
[03:35:38  COM3]:flash in thread name:COM3,id:17
[03:35:38  COM3]:[COM3]:start flash.
[03:35:38  COM3]:received hello packet
[03:35:38  COM3]:programmertype: 0
[03:35:38  COM3]:vboytest:C:\MiA3\laurel_sprout_global_images_V10.3.4.0.PFQMIXM_9.0\images
[03:35:38  COM3]:download programmer file: System.String[]
[03:35:38  COM3]:download programmer C:\MiA3\laurel_sprout_global_images_V10.3.4.0.PFQMIXM_9.0\images\prog_firehose_ddr.elf
[03:35:45  COM3]:Send done packet
[03:35:45  COM3]:file C:\MiA3\laurel_sprout_global_images_V10.3.4.0.PFQMIXM_9.0\images\prog_firehose_ddr.elf transferred successfully
[03:35:47  COM3]:send nop command
[03:35:47  COM3]:send command:?xml version="1.0" ?datanop verbose="0"  value="ping"//data
[03:35:47  COM3]:get response from target
[03:35:47  COM3]:resdump:?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Binary build date: May 22 2019 @ 17:10:49" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Binary build date: May 22 2019 @ 17:10:49
" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Chip serial num: 3287872256 (0xc3f8f300)" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Supported Functions (14):" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: program" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: read" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: nop" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: patch" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: configure" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: setbootablestoragedrive" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: erase" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: power" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: firmwarewrite" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: getstorageinfo" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: benchmark" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: emmc" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: ufs" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: fixgpt" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: End of supported functions 14" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Calling handler for nop" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Binary build date: May 22 2019 @ 17:10:49
" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Chip serial num: 3287872256 (0xc3f8f300)" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: Supported Functions (14):" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: program" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: read" //data


[03:35:47  COM3]:resdump:?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: nop" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: patch" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: configure" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: setbootablestoragedrive" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: erase" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: power" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: firmwarewrite" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: getstorageinfo" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: benchmark" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: emmc" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: ufs" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: fixgpt" //data?xml version="1.0" encoding="UTF-8" ?
data
log value="INFO: End of supported functions 14" //data?xml version="1.0" encoding="UTF-8" ?
data
response value="ACK" rawmode="false" //data


[03:35:48  COM3]:send configure command
[03:35:48  COM3]:send command:?xml version="1.0" ?dataconfigure verbose="0" AlwaysValidate="0"  ZlpAwareHost="1"  MaxPayloadSizeToTargetInBytes="1048576" MemoryName="ufs" SkipStorageInit="0"//data
[03:35:48  COM3]:get response from target
[03:35:48  COM3]:resdump:?xml version="1.0" encoding="UTF-8" ?
data
log value="ERROR: Only nop and sig tag can be recevied before authentication." //data?xml version="1.0" encoding="UTF-8" ?
data
response value="NAK" rawmode="false" //data


[03:35:48  COM3]:flashSuccess False
[03:35:48  COM3]:isFactory False CheckCPUID False
[03:35:48  COM3]:before:flashSuccess is False set IsUpdate:True set IsDone True
[03:35:48  COM3]:after:flashSuccess is False set IsUpdate:false set IsDone true
[03:35:48  COM3]:no Binary dump
[03:35:49  COM3]:no Binary dump
[03:35:49  COM3]:no Binary dump
[03:35:49  COM3]:edl authentication
[03:35:49  COM3]:GetUserInfo
[03:36:08  COM3]:AuthFlash
[03:36:08  COM3]:need edl authentication.
[03:36:08  COM3]:authentication edl.
[03:36:08  COM3]:send command:?xml version="1.0" ?data sig TargetName="req" verbose="1"//data
[03:36:08  COM3]:get response from target
[03:36:08  COM3]:resdump:?xml version="1.0" encoding="UTF-8" ?
data
sig TargetName="blob" value="AQAAAIoBAAAA8_jD9XpVKHm5I1jcO0OlbkGZgg" //data?xml version="1.0" encoding="UTF-8" ?
data
response value="ACK" rawmode="false" //data


[03:36:08  COM3]:origin:AQAAAIoBAAAA8_jD9XpVKHm5I1jcO0OlbkGZgg
[03:36:08  COM3]:SignEdl
[03:36:16  COM3]:authentication failed result -6
[03:36:16  COM3]:System.Exception: authentication failed A operação foi concluída com êxito
   em XiaoMiFlash.code.bl.SerialPortDevice.dlAuth()
   em XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
   em XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()     em XiaoMiFlash.code.bl.SerialPortDevice.dlAuth()
   em XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit)
   em XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[03:36:16  COM3]:no provision exit:COM3
[03:36:16  COM3]:flashSuccess False
[03:36:16  COM3]:isFactory False CheckCPUID False
[03:36:16  COM3]:before:flashSuccess is False set IsUpdate:True set IsDone True
[03:36:16  COM3]:after:flashSuccess is False set IsUpdate:false set IsDone true


2019-11-14 12:42:59
could you fix it?
2019-11-25 01:48:34
Invalid floor, the posts have been deleted #20
please sign in to reply.
Sign In Sign Up

Felpzinh

Rookie Bunny

  • Followers

    11

  • Threads

    1

  • Replies

    11

  • Points

    38

Read moreGet new

Xiaomi Comm APP

Stay updated on Mi Products and MIUI

Copyright©2010-2021 Xiaomi.com, All Rights Reserved
Quick Reply To Top Return to the list