Greetings to all!
Today I will show how to do Proximity sensor calibration on Mi Max 3 smartphone!
This method will help you fix problems with a Proximity sensor, of course, if this is a software problem, not hardware.
If you do not experience any problem, it is advisable not to take any action!
To cause problems with the sensor, can a protective glass, or even a simple protective film on the screen. If there are problems with the sensor, then the popular opinion is bugs in the firmware! But this is not always the case, sometimes something interferes with the sensor (glass, film). In some devices in the engineering menu there is a sensor calibration menu. And it helps in some cases.
If you have a problem, there is a problem with the sensor after the glass or film is applied, calibration can only aggravate the situation! DO NOT MAKE IT!
1. Open the settings - about the device - and click several times on the kernel version. After that you enter to the engineering menu!
Screenshot_2019-04-12-20-34-35-934_com.android.se.png (176.55 KB, Downloads: 3)
2019-04-13 01:24:33 Upload
Screenshot_2019-04-12-20-34-54-653_com.android.se.png (141.61 KB, Downloads: 3)
2019-04-13 01:24:34 Upload
2. In the engineering menu you need to select 3 Dots in the upper right corner. And choose 3 dots - Additional tool - №10 Proximity sensor.
Screenshot_2019-04-12-20-35-15-471_com.miui.cit.png (169.46 KB, Downloads: 3)
2019-04-13 01:29:24 Upload
Screenshot_2019-04-12-20-35-40-333_com.miui.cit.png (177.58 KB, Downloads: 3)
2019-04-13 01:29:25 Upload
Screenshot_2019-04-13-08-29-43-490_com.miui.cit.png (173.91 KB, Downloads: 3)
2019-04-13 01:31:35 Upload
3. You will see some number and button calibrate.
Thanks to Admin and mods family!
Thanks and best regards!