Redmi

[Tips] Tutorial : How to Fastboot Redmi 1S / 2 / Prime

2016-06-13 11:23 PM

18,811 122
Edited by Magdag at 2016-06-13 11:32 PM

This Tutorial explains how to fastboot your Redmi 1S / 2 / Prime


What is this FastBoot?

Fastboot is a protocol with which partitions of a Android Mobile device can be reflashed to Stock / Ofiicial Roms directly to your phone's flash memory. It is a small tool which is present in Android Sdk and is used for flashing kernels, bootloaders,recoveries, roms individually or whole as a Complete Roms .

Xiaomi has its own Rom Flashing tool the " Mi flash ", it works on fastboot Protocol and other different oems standards and gives a convienient Gui for easy configuring and ROM Flashing.



Prerequisites

  • A Redmi Phone
  • Fastboot Rom For Redmi 1s / 2 / prime
  • Usb Data cable
  • A computer  ( Windows based )
  • Mi Flash tool
  • Extracting tool eg. 7zip


******NOTE *******
  • Please do not forget to take a backup of your device and save it in the computer or an external device.
  • Keep your device at least 50% charged.
  • Follow the given below instructions carefully.
  • When transferring from Stable ROM to Developer ROM or vice vera performing clean install(using flash_all.bat file) is recommended.


Backup

  • You can take backup going to Settings > Additional Settings > Backup & reset > Local Bakcups > Backup
  • The backup folder will be created under File Explorer > Phone (Internal storage)> MIUI > backup > AllBackup, copy this folder and save it to computer or external device. After flashing, you can restore his folder later back to the original path mentioned above.
  • You can also do backup and restore using Mi PC Suite Manage.


Procedure

   1.Install Mi Flash Tool, it will Prompt for Driver installations . Click Install driver anyway to proceed & Finish Setup.

   2. Press and hold Volume Down + Power buttons at the same time to boot Redmi to Fastboot Mode.

   3. Connect Your Redmi  to Pc via Usb data cable .

   4. Open Mi flash tool and click Browse on the top left corner

   5. Browse to the Downloaded ~ Extracted Fastboot Rom .

   6. Press Advanced & configure all options, use flash all.bat (Only if Full Clean flash needed - erases all data )

   7. Press Refresh and you will see a New device Found On Mi Flash tool .

   8 . Press Flash  

   9. Wait untill the Flashing process is Completed .

   10. After the process is completed the Device would reboot Automatically .


Setup.jpg

Untitled-1.jpg

Untitled-2.jpg


Download Links :

Fastboot Rom : CLICK HERE

Mi Flash Tool : CLICK HERE

Mi Pc Suite : CLICK HERE


Rate

Number of participants 10Experience +23 Collapse Reason
Ayushd70 + 10 The best!
Ram Prakash + 1 Very nice!
Nicky Santhosh + 1 Useful!
Mohd Muqeem + 1
Hrishi + 1 The best!
MAK + 1 Useful!
Gagzz + 5 Useful!
AKSHAY BHOPANI + 1 The best!
Amit_ + 1 Very Usefull
450778377 + 1 Usefull

View Rating Log

2016-06-13 11:23 PM
Reply Report
Nice Tutorial, Thank you..
2016-06-14 01:30 PM
Reply Support Not support Report
androsamace
Thanks For This Tutorial.
2016-06-14 02:19 PM
Reply Support Not support Report
Nice tutorial....
2016-06-14 02:22 PM
Reply Support Not support Report
Keep Smiling hehehehe  :D:D
Thanks for Share !
2016-06-14 05:20 PM
Reply Support Not support Report
Thanks for sharing!
2016-06-14 05:22 PM
Reply Support Not support Report
Awesome thread Bro...
2016-06-14 05:39 PM
Reply Support Not support Report
Thanks for the info
2016-06-14 07:59 PM
Reply Support Not support Report
Thanks for sharing
2016-06-15 09:49 PM
Reply Support Not support Report
Thanx for the Helpful Guide
2016-06-15 10:26 PM
Reply Support Not support Report
Invalid floor, the posts have been deleted #10
12345678910... 13
  • Followers

    25

  • Threads

    16

  • Replies

    16

  • Points

    649

Beta Tester
Copyright@2010-2016 Xiaomi.com, All Rights Reserved

Quick Reply To Top Return to the list