Edited by MrAman007 at 2016-11-25 02:24 PM |
temp.jpeg (169.9 KB, Downloads: 34)
2016-11-23 15:03:57 Upload
Download ADB USB Driver or Mi PC Suite and install it on your computer (just either one if you haven’t done this)
Step 1 – Grab your Redmi 3S phone and put it into Fastboot mode. Turn off your phone completely. While your phone is off, press Volume Down (-) and Power buttons simultaneously until you see MIUI Rabbit or Fastboot logo.
Step 2 – Connect your phone to your computer using its USB cable.
Step 3 – Open up Windows Explorer and go to the folder in which all extracted TWRP Installer files are. Double-click twrp-installer.bat to run it. You will see something like this ;
temp.jpeg (96.31 KB, Downloads: 41)
2016-11-23 15:07:48 Upload
Step 4 – Now your phone has been in Fastboot mode so you can simply press any key on your keyboard to start flashing TWRP.
Step 5 – Wait till the flashing process completely finished. Once done, your device will automatically reboot into recovery mode which in this case you will see TWRP interface.
Step 6 – The first time you run TWRP, it will ask you permission for system modification. Please keep take this for consideration :“Allowing system modifications” will make TWRP modifying system partition and allows you to gain root access easily – but you won’t be able to flash OTA update.“Keep Read Only” will make TWRP leave system partition unmodified. You will still have OTA update but if you do then TWRP will be replaced.
temp.jpeg (148.16 KB, Downloads: 25)
2016-11-23 15:14:20 Upload
Step 7 – Once you swiped to allow modifications, go to Advanced Setting >> and choose “Disable dm-verity“. Failed to do so will result to bootloop error / stuck at Mi Logo.
Step 8 – Reboot your phone into normal mode and disconnect it from your PC.
ROOT WITH SUPERSU
Step 1 – Now open up your mobile web browser and download SuperSU flashable package. Normally it will be downloaded into Download folder
Step 2 – Reboot your phone into TWRP Recovery through one of these ways :Turn off your phone. While your phone is off, press and hold Volume Up ( ) button and Power button simultaneously until it reboot into recovery.Via Updater app. Open up Updater app (usually in Tools folder) >> tap on three dots (…) at the top right-hand corner of the screen >> choose Reboot into recovery.
Step 3 – Choose “Install” from TWRP main menu.
Install-TWRP-Menu.png (29.91 KB, Downloads: 24)
2016-11-23 16:01:48 Upload
Step 4 – Now locate the downloaded SuperSU .zip file and choose / tap that file. Please ignore the SuperSU version in the image below. You can always use latest stable version of SuperSU
Select-SuperSU-Zip.png (64 KB, Downloads: 22)
2016-11-23 16:03:07 Upload
Step 5 – Do “Swipe to confirm flash” and the flashing process shall begin.
Flash-SuperSu-Redmi-3S-TWRP.png (62.24 KB, Downloads: 26)
2016-11-23 16:04:08 Upload
Step 6 – Just wait until the flashing process completed
Rooting-Complete.png (71.71 KB, Downloads: 24)
2016-11-23 16:04:59 Upload
Finally, choose “Reboot System” to reboot your phone into normal state.Congratulation, your Redmi 3S is now rooted successfully. You will find SupeSU app installed and you shall see its icon in the homescreen. The first thing you have to do is launching SuperSU app up. The app will then ask you to install addon and update its binaries. Simply tap on OK.
Now, you may verify the root access by installing Root Checker app from Play Store￼.
root-checker-confirmation.jpg (26.36 KB, Downloads: 33)
2016-11-23 16:06:40 Upload