Mi MIX 2

[Review] Qualcomm Quick Charge 3.0: All You Need To Know!

2017-10-05 01:54:01
5620 172

Hi Mi Fans,
Phone charging is arguably the peskiest daily task, but Qualcomm Technologies is constantly innovating to bring phones and tablets a superior charging experience. Qualcomm started with Quick Charge 1.0, which introduced their first fast charging solution, able to charge up to 40% faster than conventional charging. Quick Charge 2.0 followed a year later, increasing the charge time advantage up to 75%, as well as introducing an array of compatible accessories including wall adapters, car adapters, and power banks.
Qualcomm Technologies continues to push the boundaries with Quick Charge 3.0, fastest, most efficient charging technology, promising a number of improvements over its previous generation speedy charging circuitry. So let’s get started.

What is Quick Charge?


If you’re new to the concept of quick charging, the result is in the name: your smartphone charges up faster than it would without Quick Charge technology. At its most simple level, Quick Charge allows for high levels of current to flow to the battery, in an attempt to maximise its charging efficiency. The latest Quick Charge products also tend to charge their batteries at higher voltages, allowing for a higher rate of power transfer through commonly found cables. However, both the phone and the charger must be compatible with the same charging voltages and currents. Your phone may support charging at 9V/2A, but if you only have a 1A charger then the process will take longer. Likewise, plugging a 2A charger into a phone that can only accept 0.7A won’t make it charge any faster. It is also possible to charge a compatible device quickly just by using a similarly high current charger, but non-certified products obviously aren’t guaranteed to work efficiency.
Quick Charge, like similar technologies from other companies, is designed to optimise power transfer in the early stages of charging, allowing users to unplug their devices with a suitable battery capacity after a short amount of time. Qualcomm boasts that it can charge some devices up to 80 percent in just 35 minutes, but it’s very rare for the company to talk about total charge time because it is simply less impressive. Power transfer in the latter stages of battery charging is much lower regardless of the charging tech used, hence why Quick Charge can boost your battery to 50 percent or more rather quickly, but will still take over an hour to fully charge your smartphone.

Qualcomm Quick Charge 3.0


Quick Charge 3.0 is engineered to refuel devices up to four times faster than conventional charging. It is designed to charge twice as fast as Quick Charge 1.0 and to be 38 percent more efficient than Quick Charge 2.0. Now consumers can spend even less time charging and can grab and go more quickly.
Qualcomm boasts a fourfold increase in charging times over conventional chargers with Quick Charge 3.0, up from the 40 percent speed increase offered by its first-generation technology. However, one of the interesting things to note is that Qualcomm isn’t touting massive increases in charging times over version 2.0, instead, the company is focusing on improved efficiency this time around.
The major new feature with 3.0 is INOV (Intelligent Negotiation for Optimum Voltage), which allows for a fined tuned power output and a more optimized charging cycle. Firstly, different batteries require different charging voltages. Version 2.0 supported four modes at varying power levels, 5 volts/2amps, 9V/2A, 12V/1.67A, and a 20-volt option. Quick Charge 3.0’s INOV communicates with the device to request any voltage between 3.2V and 20V at 200mV increments, allowing for a wider selection of voltages.
INOV has the added benefit of being able to dynamically adjust the charging voltage over the battery charging cycle. As a battery charges up, it slowly draws less and less current, which is partly why it takes longer to charge the last 20 percent than the first. Qualcomm states that its new technology allows the phone to request just enough voltage to reach the desired charge current, thereby maximising efficiency. This is useful as it reduces the amount of energy wasted during charging. Previously, extra power not used to charge the battery would be lost as heat, warming up your phone and reducing the longevity of the battery. By exerting more control over charging efficiency, less power is wasted, resulting in less heat. Qualcomm states that version 3.0 is up to 38 percent more efficient than 2.0, which is a substantial energy saving. Energy efficiency is really the major new feature with Quick Charge 3.0, but this is still very important as cooler batteries will last longer than hot ones.

How Does It Work?


Most fast-charging technologies work in the same way: draw more power, safely. To achieve that, QC is relying on two mechanisms:
1. A quick-charge enabled phone will always try to draw as much power as it can, whether the power source is QC-certified or not, but it won’t ever draw more than 2A, for safety reasons
2. A QC power supply can be identified by a QC-enabled phone, which ensures that drawing up to 3A is safe.
For this reason, QC-enabled phones will still charge faster on random 2A (non-QC) chargers, but not as fast as with a certified QC power supply.
The higher voltage is there to compensate for possible power loss and power inefficiencies in different points of the system.

How is QC 3.0 different from 2.0 and 1.0?
The best way to look at this is to compare the charging values between each of Qualcomm’s Quick Charge revisions.


Here we can see that the amount of current offered by Quick Charge has remained relatively consistent, but increasing the charging voltage has helped allow for faster charge times. With 3.0, the range of voltages will allow for fast charging and better efficiency.
For smartphones, the actual maximum amount of power available has not really changed from Quick Charge 2.0’s 18W maximum. Newer 9V models will still take the same 18W peak power as before, although lower voltage batteries may receive a power boost, allowing them to charge up a little faster than before. But this all depends on the exact hardware.

Conclusion


Quick Charge addresses an essential need to extend or improve the battery life as conveniently as possible. Being able to gain a significant charge in a relatively short time can make all the difference in the world.
However, until OEMs make it easy for users to see (on the screen) if a fast-charging is underway or not, some confusion will remain. Some communications efforts are underway, and this protocol is bound to expand, so in the near future the odds to have a happy match between phone and charger should be much higher. In the meantime, you need to pay a bit more attention. Happy charging!

Source 1, Source 2, Source 3

Rate

Number of participants 3 Experience +31 Pack Reason

View Rating Log

2017-10-05 01:54:01
Favorites76 RateRate

Bunny Pro

G697 | from Redmi Note 4

#1

Thanks.. Nice explanation
2017-10-11 06:36:59

Bunny Master

Abin@1 | from Redmi Note 3

#2

thanks for sharing
2017-10-11 22:22:23

Bunny Avanzado

Nilay Desai | from Redmi Note 4

#3

Hopefully this technology gets integrated into our phones asap!
2017-10-11 23:35:11

Bunny Pro

Mukesh Garg jsm | from Redmi Note 4

#4

thanx for explain
2017-10-11 23:42:45

Bunny Pro

Gaurav4516 | from app

#5

Thanks I am using quick charge 1.0
2017-10-12 00:06:34

Bunny Pro

Chiru739 | from Redmi Note 3

#6

Thanks for sharing....
2017-10-12 00:13:42

Bunny Master

1592505399 | from Redmi Note 4

#7

thanks for information
2017-10-12 00:20:12

Bunny Pro

Meetunadkat | from Redmi Note 4

#8

nice information
2017-10-12 00:22:41

Bunny Avanzado

PS1703755261 | from Redmi 4

#9

I s reddi 4 support quick charging
2017-10-12 00:28:10

Bunny Pro

Ankur singla | from Redmi Note 4

#10

nice information
2017-10-12 00:40:13
  • Followers

    342

  • Threads

    18

  • Replies

    2312

  • Points

2016 Diwali with Mi
3 Days in a row
7 Days in a row
21 Days in a row
40 Days in a row
70 Days in a row
100 Days in a row
Lucky Draw No.
Mi Explorers
July-100 replies in a month
Aug-100 replies in a month
Sep-100 replies in a month
1st Anniversary
71st Independence Day
My Poster My Life
MIUI 7th Anniversary
2 million registered members

Mi Comm APP

Stay updated on Mi Products and MIUI

Copyright
Content Policty
Quick Reply To Top Return to the list