Flashing Guide

[Guide] Flash Fastboot ROM through Command Prompt.

2016-06-14 13:08:23
51531 110
Edited by Shuhail Basheer at 2016-06-16 03:15 AM

Ola Mi Fans

I have seen many people saying they are not able to fastboot flash their devices through Mi Flash Tools saying they are getting errors while trying to flash.
So I got a 100% solution for those guys. Fastboot Flash Through CMD-Prompt.


*****REQUIREMENTS*****
  • A Mi/Redmi Device Obviously . :P
  • USB Data Cable.
  • Specific Fastboot ROM for your Device. You can get it from here : - http://en.miui.com/a-234.html
  • A Windows PC.
  • Drivers for your Device. Just install Mi PC Suite for it. You can get it from here : - http://pcsuite.mi.com/
  • Minimal ADB and Fastboot Installed in your PC. You can get it from here : - minimal_adb_fastboot_v1.1.3_setup.zip (2.09 MB, Downloads: 1708)
  • Winrar or 7zip for extraction. (My Preference Winrar)

*****NOTE*****
  • Please do not forget to take a backup of your device and save it in the computer or an external device.
  • Keep your device at least 50% charged.
  • Follow the given below instructions carefully.

Okay all set now Lets Start Flashing

*****PROCEDURE*****

  • Install Minimal ADB and Fastboot.
  • Extract the .tar file of fastboot rom you downloaded. Again Extract the file you extracted until you get folder as shown in the image below.
  • Open the images folder and select all and copy paste the files to Minimal ADB and Fastboot Folder in C:\Program Files (x86)\Minimal ADB and Fastboot (This is to make it more easier you can delete the files after flashing).
  • Switch off your device.
  • Put your device in Fastboot Mode by Pressing Volume Down + Power button at the same time.
  • Plug in the USB.
  • Now Shift + Right click in minimal ADB & Fastboot Folder --> Open Command window here.
  • Type fastboot devices   to check the devices is connected properly. If it is it will show like this.
  • Then Execute in the following commands one by one.
fastboot flash system system.img

Press Enter

fastboot flash boot boot.img

Press Enter

fastboot flash recovery recovery.img

Press Enter

fastboot flash cache cache.img

Press Enter

10. If you wanna completely erase user data and make your device as a newly bought device excute the following commands after the above four commands.
fastboot erase userdata

fastboot flash userdata userdata.img

11. All done now reboot by executing the following command.
fastboot reboot


Your device will now reboot and should be completely back to stock as well as be unrooted.

If you have any queries I am here to help.

Cheers.!!

Rate

Number of participants 9 Experience +9 Pack Reason

View Rating Log

2016-06-14 13:08:23
Favorites74 RateRate

Moderador

SuzAnDroid | from mobile

#1

Great tutorial! This will help a lot of people. Especially for the ones who have less knowledge about command prompt flashing.
2016-06-14 13:22:39
★★★
President,
MiFC Bangalore

blog | twitter | youtube
Great tutorial
2016-06-14 21:42:35

Bunny Semi-pro

Sakshat bunny | from mobile

#3

Never tried
2016-06-14 22:17:59
I want to recycle my life to get gold out of it!
Great Tutorial.
2016-06-15 02:32:37
Very informative . Thanks for the sharing the knowledge.
2016-06-15 03:37:07

Mi FC President

Shuhail Basheer Author | from mobile

#6

1544150509
Never tried

Try it out then. No flashing error will pop up.. 101% sure flashing.. :)
2016-06-15 04:33:16
nice info bro
2016-06-15 04:41:06
Great Tutorial.
2016-06-15 06:13:36
Good tutorial
2016-06-16 06:14:49
When saving files like recovery image and flash application, try to avoid spaces between words in folder names.

Used C:\adb\ instead of C:\Program Files (x86)\Minimal ADB and Fastboot\

2016-06-16 07:02:30
please sign in to reply.
Sign In Sign Up
  • Followers

    250

  • Threads

    15

  • Replies

    130

  • Points

Бета тестер
100K members
Power At Last
2016 Diwali with Mi
Shake!!Shake!!
Mi Explorers

Mi Comm APP

Stay updated on Mi Products and MIUI

Copyright
Content Policty
Quick Reply To Top Return to the list