This post was edited by 齐天米粉 at 21:12, Jun-18-2015 |
The Mi Travel adaptor is indeed a very small size travel adaptor. Just about the size of the 8cm mi bunny.
At the moment, it only support 2 pin/3 pin plug only.
The adaptor is a 3 pin plug by itself.
The switch on button is in front of the USB slot.
Very small and slim design.
Just ensure your phone and the plug is connected to the same wifi.
It takes a min or so for it to get connected.
Upon Successful connection, it will request you for a firmware update. This update takes about 5mins.
Once done, you are ready to use the plug!
You can see the plug will have the blue light, which indicate that it is running.
You can slot in your USB cable and start charging your phone.
There are several setting in the app which you can set.
You may control the timing for it to power on and power off.
This is very useful as it will not over charge your phone. You can set the power to be off at 2 to 3 hours after you go to sleep. In case you will like to turn off the power supply of the gadget that is connected you can do so wirelessly using the app.
Xiaomi is one more step close to a complete smart home solution!